Over the years we have reviewed a number of Fujifilm Instax products, and we just finished putting the Instax Mini 90 to the test. But my Little One still ends up taking some photos on my phone and inevitably wants to print them off right away to go into her Instax albums. Enter the Fujifilm Instax Share SP2.
The Instax Share SP2 is a wireless printer with a rechargeable battery that is powered by the Instax Share app on your phone or tablet. The Instax Share SP2 allows you to print any of your photos onto the Fujifilm Mini film that the SP2 printer uses and they print is 10 seconds.
The Instax SP2 works on your Wi-Fi connection. Through the app, you can edit your photo and even create a collage and split photos if you wish. There are a number of templates that allow you to edit your photos and print various artistic creations.
The Instax SP2 with all the various templates opens up an entire new world of Instax film creativity.
The Instax SP2 indicates battery level as well as number of photos left with the LED indicators. There is a reprint button as well. The unit itself comes in a silver and white or a gold and white color option.
Since the Instax SP2 takes the Instax Mini film, you can use the white border or decorative file borders available to purchase. There is even a special edition Christmas Instax Mini film now available.
My Little One has been in love with the Instax Printers since we tested out the SP1 printer. She loves having instant photos so much and loves that if we were out and she did not have her Instax Camera, that she can come back and print the photos she has taken on the phone. She has gotten to be quite the little wiz at the app control and printing.
I love the passion and enjoyment that my Little One expresses in taking Instax photos and creating her albums. The Instax printer just ads another level of Instax photo printing to her Instax photo arsenal.
For the more specification savvy person, here are the specs for the Instax Share SP2…
Recording method 3-color exposure with OLED
Film Fujifilm INSTAX mini instant color film (sold separately)
Photo capacity 10 prints / pack
Image size 62mm x 46mm
Supported image size 800 x 600 dots
Printing resolution 320 dpi
Printing levels 256 levels per color (RGB)
Interface Standard compliance IEEE802.11b/g, Operation frequency: 2.4GHz (5GHz is not supported.)
Supported image format JPEG, PNG
Printing time Image Recording – photo output (Feed out) Approx. 10 sec.
Approximate printing capacity Approx. 100 prints (Based on our test conditions)
*Varies depending on the conditions of use.
Power supply NP-45S(1 piece)
Charging time Approx. 90 minutes (Varies depending on the battery remaining level)
Power consumption 2 W
Operating temperature +5°C to + 40°C / +41°F to + 104°F(no condensation)
Dimensions 89.5mm x 131.8mm x 40mm (excluding projections)
Weight 250g (without battery and film pack)
Supplied accessory USB cable (BOB711)
* Specifications are subject to change without notice.
To find out more about Fujifilm and their entire lineup of products, makes sure to visit them here….
Disclosure: MomMomOnTheGo was provided product for the purpose of conducting this review. As always, MomMomOnTheGo only supports companies, products, and services that she loves.
Unless otherwise indicated, Photo Credits are to Fujifilm.
Leave a Reply